All about Ford Mondeo

Ignition module (automatic transmission models only) - removal and refitting
Engine electrical systems / Ignition module (automatic transmission models only) - removal and refitting


Note: See Chapter 6 for component location illustrations.

1 Disconnect the battery negative (earth) lead - see Section 1.

2 If better access is required, remove the resonator (see Chapter 4).

3 Unplug the electrical connector from the module (see illustration).

7.3 Separate ignition module is fitted to automatic transmission models only
7.3 Separate ignition module is fitted to automatic transmission models only - note electrical connector (A) and retaining screws (B)

4 Remove the retaining screws, and detach the module from the bulkhead mounting bracket.

5 Refitting is the reverse of the removal procedure.


© 2018 www.fordmon.ru. All Rights Reserved.