All about Ford Mondeo

ABS relay box - removal and refitting
Braking system / ABS relay box - removal and refitting


Removal
1 Disconnect the battery negative (earth) lead (Chapter 5, Section 1).

2 Detach the vacuum hose from the inlet manifold connection, pressing in the collar to disengage the tabs, then withdrawing the collar slowly.

3 To improve access, free the heater hose from its retaining clips, and position it clear of the relay box.

4 Disconect the wiring connector(s) from the relay box and, where necessary, the speed sender unit.

5 Slacken and remove the four Torx retaining screws, and withdraw the relay box from the hydraulic unit (see illustration).

22.5 Removing the ABS relay box
22.5 Removing the ABS relay box

Refitting
6 Refitting is a reversal of the removal procedure. Do not overtighten the relay box retaining screws, as the plastic is easily cracked


© 2018 www.fordmon.ru. All Rights Reserved.