All about Ford Mondeo

Stop-light switch - removal and refitting
Braking system / Stop-light switch - removal and refitting


Removal
1 Disconnect the battery negative (earth) lead (Chapter 5, Section 1).

2 Remove the lower facia panel, with reference to Chapter 11.

3 Disconnect the wiring multi-plug from the switch.

4 Rotate the switch anti-clockwise by a quarter-turn, and withdraw it from the pedal bracket (see illustration).

25.4 Removing the stop-light switch
25.4 Removing the stop-light switch

Refitting and adjustment 5 With the switch removed, reset it by fully extending its plunger.

6 Depress the brake pedal until the distance between the pedal and mounting bracket is as shown (see illustration).

25.6 To ensure correct adjustment, position the brake pedal as shown prior to
25.6 To ensure correct adjustment, position the brake pedal as shown prior to refitting the switch to its mounting bracket

7 Hold the pedal in this position, and refit the stop-light switch to the mounting bracket .

8 With the switch securely clipped in position, release the brake pedal, and gently pull it fully back to the at-rest position. This will automatically set the adjustment of the stoplight switch.

9 reconnect the wiring connector and the battery, and check the operation of the switch prior to refitting the lower facia panel (Chapter 11).


© 2018 www.fordmon.ru. All Rights Reserved.