All about Ford Mondeo

Bonnet lock - removal, refitting and adjustment
Bodywork and fittings / Bonnet lock - removal, refitting and adjustment

1 Remove the radiator grille (Section 7).

2 Release the inner and outer cables from the bonnet lock.

3 Mark the position of the lock on the crossmember, then unscrew the mounting nuts and withdraw the lock.

Refitting and adjustment 4 Refitting is a reversal of the removal procedure, starting by positioning the lock as noted before removal.

5 If the front of the bonnet is not level with the front wings, the lock may be moved up or down within the mounting holes. After making an adjustment, raise or lower the rubber buffers to support the bonnet correctly.

© 2019 All Rights Reserved.