All about Ford Mondeo

Door window regulator - removal and refitting
Bodywork and fittings / Door window regulator - removal and refitting


Removal
1 Remove the window glass (Section 12).

2 Loosen (but do not remove) the regulator and manual winder/electric motor mounting bolts (see illustrations).

13.2A Window regulator upper mounting bolts (front door)
13.2A Window regulator upper mounting bolts (front door)

13.2B Electric window motor mounting bolts (front door)
13.2B Electric window motor mounting bolts (front door)

13.2C Window regulator mounting bolts - arrowed (rear door)
13.2C Window regulator mounting bolts - arrowed (rear door)

13.2D Manual winder mounting bolts (rear door)
13.2D Manual winder mounting bolts (rear door)

3 Twist the winder or motor (as applicable) in the bolt slots, and push it inwards.

4 Slide the top bolts to the right, and push them out. Slide the bottom bolt upwards, and push it out.

5 On electric windows, disconnect the wiring multi-plug from the motor (see illustration).

13.5 Disconnecting the wiring multi-plug from an electrically-operated window
13.5 Disconnecting the wiring multi-plug from an electrically-operated window

6 Withdraw the window regulator mechanism from inside the door, through the hole in the inner panel (see illustrations).

13.6A Removing the window regulator mechanism from the front door
13.6A Removing the window regulator mechanism from the front door

13.6B Front door window regulator removed from the vehicle
13.6B Front door window regulator removed from the vehicle

13.6C Removing the window regulator mechanism from the rear door
13.6C Removing the window regulator mechanism from the rear door

13.6D Rear door window regulator removed from the vehicle
13.6D Rear door window regulator removed from the vehicle

Refitting
7 Refitting is a reversal of the removal procedure.


© 2018 www.fordmon.ru. All Rights Reserved.