All about Ford Mondeo

Boot lid lock components - removal and refitting
Bodywork and fittings / Boot lid lock components - removal and refitting


Removal
Lock barrel
1 Disconnect the battery negative (earth) lead (Chapter 5, Section 1).

2 With the boot lid open, remove the luggage space trim from the right-hand rear corner.

3 Remove the screws, and prise out the rear light trim cover from the guides.

4 Release the door-ajar sensor from the clip near the lock.

5 Slide the outer cable from the lock bracket.

Raise the inner cable until it is aligned with the slot in the barrel lever, and disconnect it.

6 Pull out the lock locating spring clip.

7 Detach the cable mounting bracket from the barrel, and remove the barrel.

Lock
8 Disconnect the battery negative (earth) lead (Chapter 5, Section 1).

9 With the boot lid open, prise out the clips and remove the trim from inside the boot lid.

10 Release the door-ajar sensor from the clip near the lock.

11 Using a Torx key, unscrew the lock mounting screws, and withdraw the lock for access to the cables.

12 Disconnect both the inner and outer cables from the lock bracket.

13 Prise open the plastic lip, and remove the central locking control rod.

14 Withdraw the lock assembly.

Refitting
Lock barrel and lock
15 Refitting is a reversal of the removal procedure.


© 2018 www.fordmon.ru. All Rights Reserved.