All about Ford Mondeo

Body side-trim mouldings and adhesive emblems - removal and refitting
Bodywork and fittings / Body side-trim mouldings and adhesive emblems - removal and refitting


Removal
1 Insert a length of strong cord (fishing line is ideal) behind the moulding or emblem concerned. With a sawing action, break the adhesive bond between the moulding or emblem and the panel (see illustration).

25.1 Using a length of cord to remove the emblem from the radiator grille
25.1 Using a length of cord to remove the emblem from the radiator grille

2 Thoroughly clean all traces of adhesive from the panel using
methylated spirit, and allow the location to dry.

Refitting
3 Peel back the protective paper from the rear face of the new moulding or emblem.

Carefully fit it into position on the panel concerned, but take care not to touch the adhesive. When in position, apply hand pressure to the moulding/emblem for a short period, to ensure maximum adhesion to the panel.


© 2018 www.fordmon.ru. All Rights Reserved.