All about Ford Mondeo

Sunroof - general information and adjustment
Bodywork and fittings / Sunroof - general information and adjustment


1 The sunroof should operate freely, without sticking or binding, as it is opened and closed. When in the closed position, check that the panel is flush with the surrounding roof panel.

2 If adjustment is required, open the sun blind, but leave the glass panel shut. Unscrew and remove the three lower frame-to-glass panel retaining screws. Slide the lower frame back into the roof.

3 Loosen the central and front securing screws. Adjust the glass roof panel so that it is flush at its front edge with the roof panel, then retighten the securing screws.

4 Pull the lower frame forwards, and insert and tighten its retaining screws to complete.


© 2018 www.fordmon.ru. All Rights Reserved.