All about Ford Mondeo

Air bag clock spring - removal and refitting
Body electrical system / Air bag clock spring - removal and refitting


Removal
1 Remove the air bag unit as described in Section 28.

2 Disconnect the horn switch multi-plug.

3 If fitted, disconnect the multi-plugs for the cruise control.

4 Remove the steering wheel and shrouds.

5 Using a small screwdriver, release the retaining tabs, then remove the clock spring from the steering column.

Refitting
6 Refitting is a reversal of the removal procedure, but make sure that the steering wheel is centralised. The clock spring must be fitted in its central position, with the special alignment marks aligned and the TOP mark uppermost. To check for this position, turn the clock spring housing anti-clockwise until it is tight, then turn in the opposite direction by two-and-three-quarter turns.


© 2018 www.fordmon.ru. All Rights Reserved.